Home arrow Hand Protection
Hand Protection
GoldKnit Plus Mediumweight

goldKnitplusmediumweight100% Kevlar® Plus FibreShield® ReinForcer String Knit

This mediumweight 100% Kevlar Plus glove is treated with our patented FibreShield process which enables the glove to repel liquids. Also, when laundered, FibreShield actually helps release grease and oil imbedded in the glove, which helps extend the glove’s life up to 30% longer. In addition, the ReinForcer, a hand-saving cross-over stitch knitted into the thumb welt, helps provide greater protection and durability. The glove provides medium-duty protection from the sharp edges of metals, glass, plastics, and similar materials, and is available in three sizes.

GoldKnit Mediumweight Sleeves

mediumweightsleeves100% Kevlar® Sleeves with/without thumb slot

A full 18 inches in length, these sleeves are knitted from 100% Kevlar fibers. They are double-layered sleeves which provide cut-resistance, flexibility, and comfort. Additionally, they also protect forearms from minor heat and burn injuries. A thumb slot prevents the sleeve from twisting while in use. Or, if you prefer, the sleeve is also available without a thumb slot for easier on and off.

Touch N Tuff

Touch-N-TuffPremium Quality 100% Thin-Mil Nitrile

Touch N Tuff disposable gloves set a whole new standard in comfort, durability, dexterity, and cleanliness. Made of 100% nitrile, the gloves contain absolutely no fillers, silicones, or plasticizers. And, although they are only 4 mils thick, Touch N Tuff gloves provide three times the puncture resistance of competitive latex or vinyl gloves. 9.5 inches in length, they are available powdered or powder-free.

Vinyl Protective Sleeves

Vinyl-Protective-SleevesLow-Cost Protection for Worker’s Arms

Ansell offers the industry’s most complete line of protective sleeve materials and styles. From vinyl, urethane, and hycar (nitrile blend), to neoprene, denim, and cane mesh, there is an Ansell sleeve for practically every application. Workers are protected against chemicals, snags, punctures, and abrasions. Cane mesh styles offer a high level of cut resistance. Vinyl styles are completely heat-sealed with no exposed elastic.


Nitrile-Coated Hot Mill Glove

For the best protection and comfort in moderate heat applications, Crusader Flex gloves are the answer. Non-woven felt insulation and a full-length heat barrier protect the worker, while two-piece construction eliminates outseams to provide better finger comfort, dexterity, and flexibility. An exclusive bonded nitrile coating helps protect against snags, punctures, abrasions, and cuts, while also enhancing dry grip. Crusader Flex gloves wear an average of four times longer than 24-ounce cotton hot mill gloves.

sol knit

Premium-Quality, Nitrile

A reinforced nitrile glove combining the durability and chemical resistance of nitrile with the added strength and comfort of an interlock knit cotton liner. This combination results in a tough, flexible glove that resists fuels, lubricants, acids, solvents, and a wide range of other chemical hazards. In addition, Sol-Knit gloves stand up to sharp edges and abrasive surfaces better than lightweight neoprene or PVC. Plus, the interlock knit liner adds strength and eliminates seams which cause hand irritation and premature wear-through. Curved, pre-flexed fingers and wing thumb reduce hand fatigue for extra worker comfort. Component materials comply with FDA regulations for food contact.


Premium-Quality, Nitrile

Sol-Vex gloves are made of a high-performance nitrile compound which provides an outstanding combination of strength and chemical resistance. When exposed to aromatic and petroleum solvents, as well as caustics and animal fats, Sol-Vex gloves have proven to be a superior choice over rubber or neoprene. Sol-Vex gloves won’t swell, weaken, or degrade, and they offer better protection against snags, punctures, abrasions, and cuts. And, as added benefits, Sol-Vex gloves do not promote contact dermatitis, and their component materials comply with FDA regulations for food contact.


Neoprene gloves offer broad-spectrum protection, with excellent resistance to a wide range of chemicals, including oils, acids, caustics, and solvents. The gloves are case hardened to increase chemical and abrasion resistance over ordinary neoprene gloves.


Nitrile-Coated, Abrasion-Resistant

Hycron gloves are the perfect replacement for cotton and leather. Their extra-tough, heavy-duty nitrile coating gives excellent dry grip and superior service when handling rough, abrasive materials. In fact, Hycron gloves outwear heavy-duty leather-palm gloves by 3 to 1. They provide excellent resistance to snags, punctures, abrasions, cuts, grease, and oil, and their soft jersey lining eliminates seams from the working areas for greater comfort.


Polyvinyl Alcohol-Coated, Interlock Knit-Lined

PVA gloves are nearly inert to strong solvents, including aromatics, aliphatics, and chlorinated solvents—chemicals which quickly deteriorate natural rubber, neoprene, and PVC gloves. With PVA gloves, there is little absorption to cause swelling, and little extraction to cause shrinking. PVA gloves only weigh about half as much as neoprene-coated gauntlets, so they provide a high level of comfort. PVA also offers good resistance to snags, punctures, abrasion, and cuts.



Petroflex gloves are an economical choice for applications where gloves become excessively contaminated or where glove controls are difficult to administer. The rough finish optimizes cut/abrasion resistance and provides excellent wet grip, while an interlock knit cotton lining provides flexibility and launderability. A jersey lining is also available for cushioning and moderate insulation.


hyflex foam gloveKnit-Lined, Dipped, Color-Coded Cuff

For light foam assembly applications, HyFlex Foam provides your workers with the highest level of comfort and protection. The patented foam coating is resistant to snags and abrasions, and it provides excellent grip in light oil applications by channeling the oil away from the glove surface.


Neoprene-Coated, Interlock Knit-Lined

The neoprene coating on Neox gloves provides better all-around resistance to cuts, abrasions, and chemicals than most other glove coatings, while the interlock knit cotton lining enhances puncture and snag resistance. Curved fingers and a wing thumb provide a natural fit and greater comfort, and the two-piece lining eliminates irritating seams.


scorpioNeoprene-Coated, Premium-Quality

Scorpio gloves offer broad-spectrum resistance to a wide range of chemicals, including oils, acids, solvents, and caustics. The interlock knit cotton lining and flexible neoprene coating stretch to provide a snug fit, and allow easy on and off, while the two-piece lining eliminates seams which can cause hand irritation and premature wear-through. A dipped rough finish makes handling wet, slippery materials easier and safer.

Barrier Film Glove

Flat-Film, Hand-Specific, Non-Woven Liner

A major breakthrough in flat-film glove technology, Barrier gloves feature a unique non-woven liner that absorbs perspiration and makes the gloves comfortable to wear, especially for extended periods. In addition, the winged-thumb, hand-specific design provides greater dexterity. Proprietary seam-fusion technology provides a secure seal against chemicals and also assures a flexible, comfortable fit for greater dexterity and reduced hand fatigue.